The Ventrix 510 series utilises an industrial single board computer and backplane architecture to provide excellent expansion capabilities, easy upgrades, reliability and repeatability. These models are ideally suited to desktop applications when industrial performance is desired. Additionally these models can be wall mounted by the brackets supplied. Our production processes are controlled under ISO 9001:2000 and every system undergoes a 4 hour diagnostic burn-in prior to shipment. Systems can be tailored to meet your exact requirements. Each system comes with a 3 year warranty, with the first year onsite as standard.
Specifications Ventrix 531 & 515 Industrial tower pc:
Hardware specification CPU: Intel Core 2 Duo E6420, 2.13GHz, 1066MHz, 4MB cache
Main memory: 1GB DDR2 667MHz, dual channel
Upgradeable to: 4GB
Chipset: Intel Q965 + ICH8DO chipset, supports RAID 0, 1, 5,10 function
Video: Integrated Intel GMA 3000 Graphics
LAN: Dual Marvell 88E8053 PCI ExpressTM Gigabit Ethernet controllers
RTC: On chip with battery backup
Watchdog timer: Programmable by S/W: 1 sec.~255 min. and 1 sec. or 1 min./step
I/O Chip: ITE 8IT8718F I/O Controller
Display Resolution: Analog display : up to 2048 x 1536 @ 75Hz (QXGA)
Flat Panels : up to 2048 x 1536 @ 60 Hz
BIOS AMI BIOS, 8Mb Flash EEPROM
Plug & Play support
Advanced Power Management & Advanced Configuration & Power Interface Support
Storage 250GB SATA RAID Edition HDD 7200rpm
DVDRW
Total drive capacity: 2 x 5.25", 1 x 3.5" HDD, 1 x 3.5" FDD / HDD
We can provide storage and backup solutions for any application
System expansion Ventrix 515-P7: 5 PCI (3 x full length, 2 x 180mm)
Ventrix 515: 1 ISA (full length) and 3 PCI (1 x full length, 2 x 180mm)
Additional slots freed up by omitting or relocating single board computer I/O brackets
System architecture Full-sized SBC with PCI / ISA golden finger
PICMG 1.0 Compliant
PCI V2.2 Compliant
Supported OS Windows Vista, Windows XP, Windows 2000 (available via Windows XP Pro
(Operating System) downgrade rights)
If your desired operating system is not listed, please contact us.
Internal interfaces SATA HDD: Serial ATA Ports, bandwidth 300 MB/s x 4
IDE HDD: Ultra ATA100/66/33, 40 pin connector x 1
Floppy: 34-pin connector x 1
USB: On board USB port x 2, USB 2.0 compliant
Serial port: 10-pin header x 3 (RS232), 14-pin header x 1 (RS232/422/485)
Mouse: Mini-DIN PS/2 x 1
Keyboard: Mini-DIN PS/2 x 1
Digital I/O Port: 4 in and 4 out with TTL level interface x 1
On board buzzer x 1
4-pin for speaker x 1
2-pin header for SMBus 2.0 x 1
IrDA: On board 5 pin header x 1
LEDs and switches Power (PC ON) LED
Hard disk access LED x 2
Environmental temperature warning LED
System fan monitor LED x 2
Environmental monitoring buzzer reset
Front: ATX system control switch, system reset
Rear: System ON / OFF power switch
External interfaces USB: Front x 2, Rear x 2
Serial: COM1 and COM2
VGA: DB-15 connector x 1
Front keyboard: Mini-DIN for keyboard only x 1
LAN: RJ45 Ethernet x 2
Mechanical Design: Desktop or wall mount
Construction: Heavy duty cold rolled electroplated steel
Colour: Black (custom colours available for large orders)
Dimensions: 350(W) x 177(H) x 411(D) mm (13.8" x 7.0" x 16.2")
Packaging size: 490(W) x 324(H) x 558(D) mm (19.3" x 12.8" x 22.0")
Total drive capacity: 2 x 5.25", 1 x 3.5" HDD, 1 x 3.5" floppy disk drive
Cooling: 1 x 120mm fan, 90 CFM
Air filter: removable (washable)
Gross weight: approximately 17kg
Environmental operational Acoustic noise: 50dBA sound pressure at 23°C (typical)
Temperature: 5 to 45°C (tested for extended operation up to 50°C)
Humidity: 5 to 90% at 25°C non-condensing
Please contact us to discuss extended or harsher environmental specifications
Environmental storage Temperature: -20 to 65°C
Humidity: 5 to 90% at 25°C non-condensing
Electromagnetic EN55022 Class A
compatibility (EMC) EN55024 Industrial severity (where applicable)
Electrostatic discharge immunity test (EN61000-4-2)
±4kV Contact, applied to enclosure port
±8kV Air, applied to enclosure port
±4kV Indirect, applied to coupling plane
Radiated, radio-frequency, electromagnetic field immunity test (EN61000-4-3)
80-1000MHz, 10 V/m (RMS, no modulation) 80% Modulation with 1kHz Sine wave
Electrical fast transient/burst immunity test (EN61000-4-4)
Power port ac, inc. protective earth
Severity ±2kV
Surge Immunity test (EN61000-4-5)
Power port ac
Severity ±2kV applied line to line
Severity ±2kV applied line to earth
Immunity to conducted disturbances induced by radio frequency fields (EN61000-4-6)
Power port ac, inc. protective earth via CDN M3
0.15-80MHz, 10 V/m (no modulation) 80% Modulation with 1kHz Sine wave, applied
via CDN type M3
Voltage dips, short interrupts and voltages variations immunity tests (EN61000-4-11)
Power port ac
>95% Reduction, 0.5 Periods
>30% Reduction, 25 Periods
>95% Reduction, 250 Periods
Voltage dips, short interrupts and voltages variations immunity tests (EN61000-6-2)
Power port ac
>30% Reduction, 0.5 Periods
>60% Reduction, 25 Periods
>100% Reduction, 250 Periods
Limits for harmonic current measurement (EN 61000-3-2), Product Class D
Limitation of voltage changes, voltage fluctuations and flicker (EN 61000-3-3)
Amplicon own a fully equipped EMC facility and can provide many additional tests to
meet your requirements.
Safety Safety of information technology equipment (EN 60950)
CE Marked
Electrical ratings Voltage: 115 ~ 230 VAC full range
Frequency: 50~60Hz
Input current: 10.0 / 5.0A for 115 / 230 VAC
Inrush current: 50 / 100A max for 115 / 230 VAC
PSU maximum secondary loading: 460W*
Active PFC
Power factor >0.96 at full load
Over power / voltage / current protection
Short circuit protection
*Higher rated power supplies are available and we recommend that you discuss your
power requirements before placing your order
Electrical ratings Voltage: 90 ~ 264 VAC full range
Dual redundant option Frequency: 47~63Hz
Input current: 8.0 / 4.0A for 115 / 230 VAC
Inrush current: 60A / 80A max for 115 / 230 VAC per module
PSU maximum secondary loading: 400W*
Active PFC
Power factor >0.96 at full load
Over power / voltage / current protection
Short circuit protection
Hot-swappable / hot-pluggable
Balance load sharing design
AC inlet in each module
*Higher rated power supplies are available and we recommend that you discuss your
power requirements before placing your order
Reliability System MTBF: >15,000 hrs (we can provide information for specific configurations)
Four hour burn-in diagnostic run on every system
